Plastic seals are widely used, low-cost and safe seals that can be used in almost all cases.
What you see in the video below is how to seal iron shelves and doors, which are being sealed by a belt sealer. As you can see, first the door is completely closed and then the seal belt passes through the door compartment and passes through the seal lock and is stretched to the end so that the seal belt has no play space (this is a very important point). It is considered) then the sequence of the belt, which seems to be extra after the sealing operation is completed, is collected and goes into the chamber that is installed on the sealing plate.
Here, we must pay attention to the important point that the extra strap of the seal should never be cut, because this will question the security of the work and reduce your degree of confidence of tampering or not tampering with the seal. At the end of the film, we see that to open the sealed area, the seal must be cut and torn.
Belt seals are the most powerful plastic seals in terms of tensile strength, and their belts can withstand up to 50 kg of pressure. However, the method of welding the cap to the seal body, which determines the protection of the internal spine of the seal, has a significant effect on the security of this seal. Only ultrasonic welding can give the necessary validity to the belt seal and make it impenetrable. Dayan Ayman Prosor Company is a provider of belt seals with the most accurate production standards.
You can also call 021-44137800 to register your orders.
